Check the pin and battery connect
Cable voltage 4.8V (for 5.0V)
Check changing IC(U4000) SMT status
Exchange changing IC or change
LGE Internal Use Only
START
terminals of I/O connector
Connection OK?
Yes
Is the u-USB
Yes
Is it changing properly
After turning on?
No
by X-ray.
the Main board and reset.
Charger Troubleshoot Flow
U4000
No
Change I/O connector
No
Change TA (or u-USB cable)
Yes
END
- 71 -
Copyright © 2013 LG Electronics. Inc. All right reserved.
4. TROUBLE SHOOTING
Only for training and service purposes