12.6
Installing the fork protector
12.7
Removing the fork legs
SERVICE WORK ON THE CHASSIS 12
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position the fork protector on the right fork leg. Mount and
F03463-11
tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove the cable tie.
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
S04825-10
–
Loosen screws
–
Loosen screws
S03576-11
1
.
M6
10 Nm (7.4 lbf ft)
2
.
3
.
M6
10 Nm (7.4 lbf ft)
p. 55)
(
p. 101)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
p. 114)
57