Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly; Installing The Palm-Rest And Keyboard Assembly - Dell G5 SE 5505 Service Manual

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the memory modules.
5. Remove the wireless card.
6. Remove the left fan.
7. Remove the right fan.
8. Remove the solid-state
9. Remove the I/O board.
10. Remove the touchpad.
11. Remove the speakers.
12. Remove the heat sink.
13. Remove the display assembly.
14. Remove the power-adapter
15. Remove the system board.
NOTE: The system board can be removed with the heat sink attached.
About this task
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.

Installing the palm-rest and keyboard assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
Before working inside your
drive.
port.
computer.
Removing and installing components 51