Spray Guns
Gravity-Feed Spray Gun
• Designed to provide optimal atomization and particle size
• Stainless fluid needle and nozzle are compatible with today's
advanced coatings
• 600 milliliter acetal cup allows viewing of paint fluid level while
providing chemical resistance and easy cleaning
• In-line 80 mesh filter removes dirt particles from paint,
preventing defects
• Includes adjustable fluid, pattern and air controls
5.9
AVG. SCFM Requirement @ 40 PSI
Gravity-Feed Touch-up Spray Gun
• Stainless steel fluid needle and nozzle for corrosion-resistant life
• In-line paint filter removes dirt particles from paint,
preventing defects
• See-through cup allows viewing of paint fluid level
• Includes adjustable fluid, pattern and air controls
2.5
AVG. SCFM Requirement @ 40 PSI
High Volume Low Pressure (HVLP)
Spray guns operate at lower air cap pressures than conventional spray guns (below 10
PSI). Atomized paint from an HVLP spray gun is delivered to the work surface at lower
velocities than conventional spray guns, reducing bounceback and overspray. This results
in a higher transfer efficiency of material, reducing paint consumption by 20-30%.
HVLP Gravity-Feed Spray Gun
• Designed to provide optimal atomization and particle size
• Stainless fluid needle and nozzle are compatible with
today's advanced coatings
• 600 milliliter acetal cup allows viewing of paint fluid level
while providing chemical resistance and easy cleaning
• In-line 80 mesh filter removes dirt particles
from paint, preventing defects
• Includes adjustable fluid and pattern controls
6.2
AVG. SCFM Requirement @ 40 PSI
30
www.chpower.com
Visit us online:
DH7800
DH7600
DH7900