Connecting High Ac/Dc Power - Siemens SIMATIC NET Installation Manual

2.5.1

Connecting High AC/DC Power

To connect a high AC/DC power supply to the device, do the following:
Electrocution hazard – risk of death, serious personal injury and/or damage to
the device
Make sure the supplied cover is always installed over high voltage screw terminal
blocks.
Electrical hazard – risk of damage to equipment
Do not connect AC power cables to a 12, 24 or 48 VDC power supply terminal block.
Damage to the power supply may occur.
RUGGEDCOM RX1511
Installation Manual, 04/2021, C79000-G8976-1056-20
DANGER
NOTICE
Installing the Device
2.5.1 Connecting High AC/DC Power
11