Antenna Settings For Diseqc 1.0/1.1 And Searching Digital Channels From A Satellite Automatically - Grundig 43 GFB 6820 User Instructions

Table of Contents

Advertisement

SETTING­FURTHER­CHANNELS
11­
Press »
« (red) to start searching.
Notes:
W hen updating via the same satellites a
7
security query is displayed at the start of a
search.
I f the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
»
« (green).

I f »
« (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– T he »Digital Searching« menu appears,
and the scan for TV channels begins.
– T he search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
12­
Switch to the Channel Editor with »
(yellow);
or
press »EXIT« to end the setting.
86­
ENGLISH
Antenna­settings­for­DiSEqC­
1.0/1.1­and­searching­digital­
channels­from­a­satellite­auto-
matically
Note:
The following description about the LNB set-
7
tings premise a substantial expertise about
the satellite systems. Ask your specialist
dealer.
Open the menu with »MENU«.
Select menu item »Settings« with »
<
»
« or »
Select the menu item »Source« with »
<
»
« and press »
– » Source« menu is active.
Select the line »Automatic Channel Search«
«

with »
confirm.
Select the option »Satellite (DVB-S/S2)«
with »
confirm.
Select the line »Antenna Settings« with »
or »
– T he »Antenna Settings« menu is dis-
played.
Select and set the required option for the
antenna settings with »
Satellite
Press »OK« then select the required satel-
lite with »
confirm.
­
LNB­Type­
Press »OK« then select the required LNB
Type with »
data and confirm with »
­
LNB­Power­
Set the LNB power to »Off«, »13/18V« or
»14/19V« depending on the LNB type by
using »
­ LNB­selection­
See DISEqC mode.
­-----------------------------------------------------
>
« and press »OK« to confirm.
« to confirm.
V
« or »
« and press »OK« to
V
Λ
« or »
« and press »OK« to
V
Λ
« and press »OK« to confirm.
Λ
« or »
V
« or »
« and press »OK« to
V
Λ
<
>
« or »
«, enter the required

<
>
« or »
«.
«, »
«,
V
Λ
>
« or
«
V
«:
Λ
« (green).

Advertisement

Table of Contents
loading

Table of Contents