Connecting The Antenna And Power Cord - Grundig 43 GFB 6820 User Instructions

CONNECTION/PREPARATION
Connecting­the­antenna­and­power­cord
3
1­ To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket SATELLITE on the television
set;
and / or
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the
antenna socket ANT­IN on the television
set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket ANT­IN on the televi-
sion set;
or
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the
antenna socket ANT­IN on the television
set.
10­ ENGLISH
­-----------------------------------------------------
SERVICE
LAN
1 2
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket
7
after you have connected the external
devices and the antenna.
Do not use an adapter plug or extension
7
cable which does not meet the applicable
safety standards. Do not make changes on
the power cord.