Table of Contents
Advertisement
NETWORKSETUP
ConnectingtheTVtoa"hidden"
network
Even if the SSID (Service Set Identifier) of the
router is not visible, you can connect your TV to
this network.
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confrim.
3
Select the menu item »Network« with »
<
»
« and press »
V
– » Network« menu is active.
4
Select the line »Select Access Point« with
»
« or »
« and press »OK« to confirm.
V
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
5
Press »
« (red).
– » Add Network« menu appears.
6
Select the line »Access Point Name« with
»
« or »
« and press »OK« to confirm.
V
Λ
– A menu for entering the SSID will be
displayed.
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
7
Select the required character with »
<
>
»
«, »
« or »
« and move to the next
Λ
character with »OK«.
– U sing »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect »Del« to delete the character
entered and press »OK« to confirm.
8
Confirm the SSID by pressing »
9
Select the line »Security Type« with »
»
« and select the required option (WPA2)
Λ
<
>
with »
« or »
«.
10
Confirm the setting with »
– T he network is now in the »Select Access
Point« menu.
- ------------------------------------------------------------------------------------------
«, »
V
Λ
>
« to confirm.
«,
V
« (green).
« or
V
« (red).
11
Select the network with »
press »OK« to confirm.
– W ireless connection password screen is
displayed.
12
Select the required character with »
<
»
«, »
« or »
Λ
character with »OK«.
«,
– U sing »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
« or
– S elect »Del« to delete the character
entered and press »OK« to confirm.
13
Confirm the password by pressing »
(green).
– » Connecting ... Please wait« message will
be displayed.
14
Press »
« (green) to make sure that the
network connection is established with the
current settings.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
15
Press »EXIT« to end the setting.
« or »
« and
V
Λ
V
>
« and move to the next
ENGLISH
«,
«
81
Advertisement
Table of Contents
