Table of Contents
Advertisement
NETWORKSETUP
11
Select the line »Gateway« with »
Enter Gateway address with »1...0«.
12
Select the line »Select Access Point« with
»
« or »
« and press »OK« to confirm.
Λ
V
– » Select Access Point« menu is displayed
by scanning available wireless networks.
13
Select the network that you want to connect
with »
« or »
V
Λ
– W ireless connection password screen is
displayed.
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
14
Select the required character with »
<
>
»
«, »
« or »
Λ
character with »OK«.
– U sing »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect »Del« to delete the character
entered and press »OK« to confirm.
15
Confirm the password with »
– » Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
16
Press »
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– » Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
17
Press »EXIT« to end the setting.
80
ENGLISH
- ------------------------------------------------------------------------------------------
«.
V
« and confirm with »OK«.
V
« and move to the next
« (green).
ChangeTVName
To make it possible to identify your TV in the net-
work, the name "Inter@ctive TV 4.0" is assigned
at the factory. You can change the name.
1
Open the menu with »MENU«.
2
Select menu item »Settings« with »
<
»
« or »
3
Select the menu item »TV« with »
and press »
– » TV« menu is active.
4
Select the line »About« with »
and press »OK« to confirm.
5
Select the line »TV Name« with »
»
« and press »OK« to confirm
Λ
«,
6
Delete the current name step-by-step with
»
« (red).
7
Select the required character with »
»
«, »
Λ
character with »OK«.
– U sing »Shift« ➡ »OK«, you can switch
between uppercase letters / numbers and
lowercase letters / special characters.
– S elect »Del« to delete the character
entered and press »OK« to confirm.
8
Confirm the new name by pressing »
(green).
9
Press »EXIT« to end the setting.
>
« and press »OK« to confirm.
« to confirm.
V
<
>
« or »
« and move to the next
«, »
«,
V
Λ
« or »
«
V
Λ
« or »
«
V
Λ
« or
V
«,
V
«
Advertisement
Table of Contents
