Functions Of Onboard Switches - Sony HSCU300RF Service Manual

Ref.No. Name
D303 TX FAULT
D304 TX DISABLE
D306 RX-LOS
D400 CONF DONE
1-9-2.

Functions of Onboard Switches

DPR-361 Board
A B C
S100
DPR-361 board (Side A)
Note
Do not change the settings of unused switches.
Ref.No. Name
S100 VerUP
PLD VerUP
NORMAL/DEBUG
NORMAL/DEBUG
HSCU300RF/HSCU300R
Color Description
Red Lights when an error is detected in the optical out-
put.
Red Lights when the optical output is invalid.
Red Lights when no optical signal is received.
Red Lights during download of FPGA (IC100) data on
the SDP-19 board or when a configuration error
occurs.
D E F G
8
Bit Description
1 Used to enable software update using a memory
stick.
2 Used to enable PLD update using a memory stick.
3 Not used
4 Not used
1
2
3
4
5
6
7
Normal
state
Off
Off
Off
Off
Factory
setting
OFF
OFF
OFF
OFF
1-15