Identification Of Parts; Cem70 Mount Ports - iOptron CEM70 Instruction Manual

2.2. Identification of Parts

Dovetail Locking Knob
DEC Gear Switch
Base Mounting Screw
AZI Adjustment Knob

2.3. CEM70 Mount Ports

CEM70 and CEM70EC
On Mount Base Main Panel:
The main cable connection ports of a CEM70/CEM70EC are shown in Figure 2.

DC 12V 5A: DC power socket to power the mount (2.5mmX5.5mm, 5525)

ON/OFF: Power Switch

ST-4: Autoguide port

USB: USB port for mount firmware upgrade and computer control

HBX (Hand Box): For connecting to an 8407+ Hand Controller
On Dovetail Saddle:
Shown in Figure 7 are the ports on dovetail saddle of a CEM70.
Dovetail Saddle
ALT Locking Clamp
Mount Base
Figure 1.CEM70 mount assembly
Figure 2. Ports on a CEM70 mount base
RA Axis
ALT Adjustment Knob
7
CW Shaft Mounting House
Counterweight
CW Shaft
CW Shaft Safety Lock