Appendix E. Polar Alignment Using Ipolar Electronic Polarscope - iOptron CEM70 Instruction Manual

Appendix E. Polar Alignment using iPolar Electronic PolarScope

Connect iPolar to a PC and Download iPolar Software
(1) Connect the iPolar Electronic Polar Scope to your PC USB port;
For CEM70G, plug a USB cable into the USB3.0 port on the rear end of mount RA axis or on
the mount base panel to connect the iPolar to a computer.
For CEM70/CEM70EC, plug a USB cable into the iPolar port on the rear end of mount RA axis
to connect the iPolar to a computer.
(2) The iPolar driver will be automatically installed if it is the first time connecting to the computer;
(3) You should see "iOptron iPolar" under Camera catalog in computer Device Manager;
(4) Goto www.ioptron.com
(5) The iPolar software needs Windows 7, 8.1, 10 or later version, 32 bit or 64 bit operation system,
with .NET Framework 4.8 or later version.
Please refer to iPolar #3339 product page for latest firmware and Instruction Manual:
iPolar Software: https://www.ioptron.com/v/firmware/3339_iOptron_iPolar.exe
Instruction Manual: https://www.ioptron.com/v/manuals/3339_iPolarOperationManual.pdf
or
to download iPolar software and save on your computer;
49