Frigidaire FAK127P1V Use & Care Manual page 8

Air Conditioner features
(continued)
TIMER: DELAY STOP/START
FEATURE:
Temp/Timer Temp/Timer
Timer Timer
Temp/Timer Temp/Timer
THEN DO THIS:
PRESS UP ( ) OR
DOWN ( ) BUTTON
SLEEP FEATURE:
Sleep Sleep
DO THIS:
PRESS
SLEEP
BUTTON
CHECK FILTER FEATURE:
Sleep Sleep
On/Off On/Off
Fan Fan
DO THIS:
PRESS TIMER
BUTTON
Temp/Timer Temp/Timer
Check Check
Filter Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Check Check
Filter Filter
Temp/Timer Temp/Timer
YOU WILL SEE:
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
NOTE: For Delay Stop, the unit must be in the ON position.
NOTE: For Delay Start, the unit must be in the OFF position.
To adjust timer setting, tap or hold the UP arrow (
DOWN arrow ( ) to change delay timer at
increments, up to 10 hours, then at 1 hour increments up to
24 hours. The control will count down the time remaining
until start ( 8, 7.5, 7, etc.).
automatically selects cooling at high Fan Speed. The
temperature maintained will be the same as previously set.
To change the set temperature, press "COOL" then Up or
Down arrows until the desired temperature is indicated on
the display. After 5 seconds, the control will automaticall y
change the display back to the hours remaining until the
unit will start/stop. Turning the unit "ON" or "OFF" at any
time will cancel the Delay Start/Stop function.
YOU WILL SEE:
LIGHT ON
NOTE: In this "MODE" the selected temperature will
increase by 2 F 30 minutes after the mode is selected.
The temperature will then increase by another 2 F after an
additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally
selected temperature. This ends the "Sleep" MODE and
the unit will continue to operate as originally programmed.
The "Sleep" MODE program can be cancelled at any time
during operation by again pressing the "Sleep" button.
YOU WILL SEE:
LIGHT ON
NOTE: This feature is a reminder to clean the Air Filter
(See Care and Cleaning) for more efficient operation. The
LED (light) will illuminate after 250 hours of operation. To
reset after cleaning the filter, press the "Check Filter "
button and the light will go off.
8
Timer Timer
On/Off On/Off
Fan Fan
LIGHT ON
The Delay Start mode
Temp/Timer Temp/Timer
Check Check
Sleep Sleep
Filter Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Check Check
Sleep Sleep
Filter Filter
Temp/Timer Temp/Timer
) or the
5 hour