Table of Contents
Advertisement
Operation of Current
Device
Air Conditioner
Features
CONTROL PANEL
EXHAUST SELECTOR
REMOTE CONTROL
!
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
The power supply cord contains a current device that senses damage to the power cord.
To test your power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is
also indicated by a light on the plug head).
NOTES:
Do not use this device to turn the unit on or off.
Always make sure the RESET button is pushed in for correct operation.
The power supply cord must be replaced if it fails to reset when either the TEST button
is pushed, or it can not be reset. A new one can be obtained from the product
manufacturer.
If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one
obtained from the product manufacturer.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote as
shown below and all its functions, then follow the symbol for the functions you desire.
The unit can be controlled by the control panel alone or with the remote.
SLEEP MODE
Sleep
Sleep
SETS MODE
CHECK FILTER
RESET BUTTON
TURNS UNIT
ON OR OFF
SETS FAN
SPEEDS
ACTIVATES
TIMER
TEMP/TIMER
ADJUSTMENT
:
Temp/Timer
Temp/Timer
:
Check
Check
Filter
Filter
Temp/Timer
Temp/Timer
ACTIVATES
TIMER
SLEEP MODE
SETS MODE
ADJUSTS
TEMPERATURE
OR TIME
5
SETS FAN
SPEEDS
ÈÕÆÚ£º 2004-11-1
ÈÕÆÚ£º 2004-11-1
Timer
Timer
On/Off
On/Off
Fan
Fan
TURNS UNIT
ON OR OFF
Advertisement
Table of Contents
