Frigidaire FAK127P1V Use & Care Manual page 7

Air Conditioner features
(continued)
TO USE AUTO COOL FEATURE:
Temp/Timer Temp/Timer
Timer Timer
Temp/Timer Temp/Timer
AUTO COOL
TO OPERATE ON FAN ONLY:
Sleep Sleep
TO USE THE ENERGY SAVER
FEATURE:
Sleep Sleep
On/Off On/Off
Fan Fan
DO THIS:
PRESS TO
SELECT
Temp/Timer Temp/Timer
Check Check
Filter Filter
Temp/Timer Temp/Timer
DO THIS:
PRESS
MODE
BUTTON
CHOOSE
FAN
Temp/Timer Temp/Timer
Check Check
Filter Filter
Temp/Timer Temp/Timer
DO THIS:
PRESS
MODE
BUTTON
CHOOSE
ENERGY
SAVER
YOU WILL SEE:
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
NOTE: Fan starts at High Speed and adjusts to a slower
speed as the room temperature dictates. For example if
the room does not get too warm, it will stay at the slowest
speed. If the room temperature rises quickly, such as a
door being opened, it will automatically go to the highest
speed. The fan speeds will re-adjust back to the slowest
speed as the room returns to the original set temperature.
Press the fan button to adjust the fan speed manually.
YOU WILL SEE:
LIGHT ON
NOTE: Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale air. You
can choose any fan speed you prefer. During this function,
the display will show the actual room temperature, not the
set temperature as in the cooling mode.
YOU WILL SEE:
NOTE: In this mode, the fan will continue to run for 3
minutes after the compressor shuts off. The fan then
cycles on for 2 minutes at 10 minute intervals until the
room temperature is above the set temperature, at which
time the compressor turns back on and cooling starts.
7
Timer Timer
On/Off On/Off
Fan Fan
LIGHT ON
Temp/Timer Temp/Timer
Check Check
Sleep Sleep
Filter Filter
Temp/Timer Temp/Timer
Temp/Timer Temp/Timer
Check Check
Sleep Sleep
Filter Filter
Temp/Timer Temp/Timer
LIGHT ON