Table of Contents
Advertisement
CHAPTER 4: QUICKFLY RIGGING
IMPORTANT SAFETY CONSIDERATIONS!
When installing Meyer Sound loudspeakers and subwoofers, the following precautions should always be observed:
• All Meyer Sound products must be used in accordance
with local, state, federal, and industry regulations. It is
the owner's and user's responsibility to evaluate the reli-
ability of any rigging method for their application. Rigging
should only be carried out by experienced professionals.
• Use mounting and rigging hardware that has been rated
to meet or exceed the weight being hung.
LEOPARD RIGGING OPTIONS
Table 4 summarizes the available rigging options for LEOPARD. For complete information about rigging hardware, including
dimensions, weight, configuration, and load ratings, refer to the MG-LEOPARD/900 Assembly Guide (PN 05.243.080.01)
available at meyersound.com/documents.
Table 4: LEOPARD Rigging Options
Model
Weight
MG-LEOPARD/900
60.5 lb
multipurpose grid
(27.5 kg)
(PN 40.243.080.01)
GROUNDSTACK
DOWNTILT KIT:
(0.9 kg)
MG-LEOPARD/900
(PN 40.243.163.01)
MVP motor Vee plate
20 lb
(PN 40.215.184.01)
(9.1 kg)
MTF-LYON/LEOPARD
71 lbs
transition frame
(32.2 kg)
(PN 40.232.140.01)
PBF-LEOPARD
4.9 lb
pull-back frame
(2.2 kg)
(PN 40.243.185.01)
MCF-LEOPARD
37 lbs
caster frame
(16.8 kg)
(PN 40.243.130.01)
NOTE:
The MCF-LEOPARD caster frame does not include quick-release pins because it is secured with the
quick-release pins included with the loudspeaker. The GROUNDSTACK DOWNTILT KIT: MG-LEOPARD/900
does not include quick-release pins because the angle feet are secured with the quick-release pins included with the
grid.
Features
With some restrictions, flies up to 23 LEOPARDs at a 5:1
safety factor; supports mixed arrays of LEOPARDs and
900-LFCs without transition hardware; accommodates a
variety of pickup configurations with four corner and 13
center pickup points; includes attachment points to
accommodate brackets and adapters for lasers and
inclinometers; can also be used for groundstacking
2 lb
Includes two angle feet that attach to the rear of the
MG-LEOPARD/900 grid that add from 3-8 degrees of tilt
to groundstacks
Fine tunes the horizontal aim of arrays; compatible with
MTG-LEO-M, MTG-LYON, MTG-1100, and
MG-LEOPARD/900 grids
With some restrictions, flies up to ten LEOPARDs at a 5:1
safety factor below LYON arrays for downfill; includes
rear attachment points for pull-back; collapsible for easy
transport on top of LEOPARD stacks
Attaches to bottom of LEOPARD and 900-LFC arrays (to
the bottom cabinet) and provides pull-back for extreme
array downtilt; can also be used to add tilt to LEOPARDs
groundstacked on the 900-LFC
Safely transports up to four LEOPARD cabinets, making
it easy to assemble and disassemble arrays in blocks of
four cabinets
• Make sure to attach mounting hardware to the building's
structural components (roof truss), and not just to the
wall surface.
• Make sure bolts and eyebolts are tightened securely.
Meyer Sound recommends using Loctite
threaded fasteners.
• Inspect mounting and rigging hardware regularly. Imme-
diately replace any worn or damaged components.
Required Quick-Release Pins
5/16 in x 7/8 in (red button),
PN 134.025, qty 10 included
5/16 in x 7/8 in (red button),
PN 134.025, qty 0 included
7/16 in x 9/10 in (black button),
PN 134.050, qty 0 included
5/16 in x 7/8 in, red button,
PN 134.025, qty 8 included
5/16 in x 5/8 in (black button),
PN 134.024, qty 2 included
5/16 in x 5/8 in (black button),
PN 134.024, qty 0 included
®
on all
Required
Shackles
5/8-inch or
3/4-inch
—
—
3/4-inch or
7/8-inch
1/2-inch or
5/8-inch
1/2-inch
—
23
Advertisement
Table of Contents
