Before Use; Parts And Accessories - Braun MultiQuick 5 Vario Quick Start Manual

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.

Before use

Please read the user instructions carefully and
completely before using the appliance and retain
for future reference. Remove all packaging and
labels and dispose them appropriately.
Caution
•
The blades are very sharp!
To avoid injuries, please handle
blades with utmost care.
• Care shall be taken when handling
the sharp cutting blades, emptying
the bowl and during cleaning.
• This appliance can be used by per-
sons with reduced physical, sensory
or mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
• Children shall not play with the appli-
ance.
• This appliance shall not be used by
children.
• Children shall be kept away from the
appliance and its mains cord.
• Always switch off and unplug the
appliance when it is left unattended
and before assembling, disassem-
bling, cleaning and storing
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the bottom
of the appliance.
6
5722113864_MQ5000_5045_TW.indd 6 5722113864_MQ5000_5045_TW.indd 6
• This appliance is designed for house-
hold use only and for processing nor-
mal household quantities.
• Do not use the appliance for any pur-
pose other than the intended use
described in the user manual. Any
misuse may cause potential injury.
• Do not use any part in the microwave.
• Please clean all parts before first
use or as required, following the
instructions in the Care and Cleaning
section.

Parts and Accessories

1 Variable speed regulator
2 Variable speed button (on/off)
3 Turbo button (T)
4 Motor part
5 EasyClick release buttons
6 Blender shaft
7 Whisk accessory
a Gearbox
b Whisk
8 Beaker
9 350 ml chopper accessory «hc»
a Lid
b Blade
c Bowl
d Anti-slip ring
10 500 ml chopper accessory «ca»
a Lid
b Blade
c Bowl
d Anti-slip ring
11 1250 ml chopper accessory «bc»
a Lid (with gear)
b Chopping blade
c Ice blade
d Chopper bowl
e Anti-slip rubber ring
How to Use the Appliance
Setting the speed
When activating the variable speed button (2), the
processing speed corresponds to the setting of the
variable speed regulator (1). The higher the setting,
the faster the chopping speed. You can adjust the
speed conveniently during operation by turning the
speed regulator.
Maximum processing speed can be achieved by
pressing the Turbo button (3). You may also use the
28.10.19 10:40 28.10.19 10:40