Before Use; Parts And Accessories - Braun MultiQuick 7 Manual

English
Our products are engineered to meet the highest
standards of quality, functionality and design. We
hope you thoroughly enjoy your new Braun
appliance.

Before Use

Please read the user instructions carefully and
completely before using the appliance and retain
for future reference. Remove all packaging and
labels and dispose them appropriately.
Caution
•
The blades are very sharp! To
avoid injuries, please handle
blades with utmost care.
• Care shall be taken when handling
the sharp cutting blades, emptying
the bowl and during cleaning.
• This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and if they
understand the hazards involved.
• Children shall not play with the
appliance.
• This appliance shall not be used by
children.
• Children shall be kept away from the
appliance and its mains cord.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Always switch off and unplug the
appliance when it is left unattended
and before assembling, disassem-
bling, cleaning and storing.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the
bottom of the appliance.
• This appliance is designed for house-
hold use only and for processing
normal household quantities.
6
• Do not use the appliance for any
purpose other than the intended use
described in the user manual. Any
misuse may cause potential injury.
• Do not use any part in the microwave.
• Please clean all parts before first use
or as required, following the instruc-
tions in the Care and Cleaning section.

Parts and Accessories

1 Smartspeed switch / variable speeds
2 Motor part
3 EasyClick Plus release buttons
4 ActiveBlade shaft
5 Beaker
6 Whisk accessory
a Gearbox
b Whisk
7 500 ml chopper accessory «mc»
a Lid (with gear)
b Chopping blade
c Ice blade
d Chopper bowl
e Anti-slip rubber ring
8 Stand for storing
How to Use the Appliance
Smart Speed Switch for
Variable Speeds
One squeeze, all speeds. The more you press, the
higher the speed. The higher the speed, the faster
and finer the blending and chopping results.
One handed operation: the Smartspeed switch (1)
allows you to turn on the appliance and control the
speed with one hand.
ActiveBlade Shaft (A)
The hand blender is equipped with an ActiveBlade
shaft, which enables the knife extend to the bottom
of the bell. The adjustment is made automatically by
pressure required in blending tasks, especially
suited to mix hard foods e.g. raw fruits and
vegetables.
It is also perfectly suited for preparing dips, sauces,
salad dressings, soups, baby food, as well as
drinks, smoothies and milkshakes.
For best results, use the highest speed.
Assembly and Operation
• Attach the ActiveBlade shaft (4) to the motor part
until it clicks.