Connect Whip Hose To Gun Or Gun Manifold - Graco Gusmer Power-Lock 246045 Instructions - Parts Manual

Connect Whip Hose to Gun or Gun Manifold

For best whip hose flexibility, assemble
whip hose to gun or gun manifold as
instructed.
1. Assemble A and B component hoses to
gun or gun manifold fittings as shown in
F . 1.
IG
309572S
2. Tighten fittings to A and B component
hoses. Ensure hose remains flat after fit-
tings are tightened. Loosen and retighten
fittings as necessary to eliminate any
torque on hoses. This will help achieve a
flat profile on the hose.
Tighten
Tighten
F . 1
IG
Installation
Tighten
9