Storage - Philips NORELCO 9000 Series Instructions Manual

22
English
Cleaning the precision trimmer attachment

Storage

11 Place the arrows on the ring in line with the
projections in the shaving head holder. Turn
the ring clockwise until it clicks to indicate
that the ring is fixed.
Hold the shaving head holder in your hand
when you reinsert the shaving heads and
reattach the retaining rings. Do not place
the shaving head holder on a surface when
you do this, as this may cause damage.
12 Attach the shaving head holder to the
bottom part of the shaving unit ('click').
Never dry the trimmer with a towel or tissue,
as this may damage the trimming teeth.
Clean the trimmer after each use.
1 Switch the shaver on.
2 Rinse the trimmer under a warm tap.
3 After cleaning, switch off the shaver.
4 Carefully shake off excess water and let the
trimmer air dry.
5 For optimal performance, lubricate the
teeth of the trimmer with a drop of mineral
oil every six months.
- Store the shaver in the travel case supplied.
Note: Make sure the shaving unit is dry
before you store the shaver.