Charging - Philips NORELCO 9000 Series Instructions Manual

Charging

2
1
- Charging or using the product at
temperatures below 40 °F (4.5 °C) or higher
than 95 °F (35 °C) adversely affects the
lifespan of the battery.
- Do not charge the shaver in a pouch or
travel case.
- The power plug transforms 100-240V AC to
less than 24V DC.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty. The battery charge is
indicated by the lights of the battery charge
indicator on the display.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the shaver while it is
charging.
1 Make sure the product is turned off.
2 Put the small plug in the shaver and
connect the power plug to any 100V to
240V AC outlet. Use only the power cord
provided.
When you connect the shaver to the wall
socket, you hear a sound.
3 After charging, remove the power plug from
the wall outlet and pull the small plug out of
the product.
13
English