Download Print this page

Parts List; Troubleshooting Chart - FWE FOOD SENTRY UHST Series Operating Instructions Manual

Heated holding cabinets

Advertisement

PARTS LIST

FWE PARTS DEPARTMENT: 815 459 7500
REPLACEMENT PARTS
Knob for thermostat
Push handle, aluminum bar, 12.5"
Push handle, aluminum bar, 21.5"
Spacers for push handles
Bolts, hex head for handles
Door Latch - Chrome Magnetic
Bumper insert, black vinyl
Extension Cord 10 ft. Plug: 5-15P
Extension Cord 10 ft. Plug: 5-20P
Casters: 5'' rigid
Casters: 5'' swivel with brake
Tray slides, pair (TST models)
Tray slides, pair (UHST models)
Shelves: Sized by Model Number
Other Replacement Parts are available. Your Model Number and Serial Number
are required when requesting Parts or Service. These numbers are listed on your
Serial Tag located by the power cord.
TROUBLE-SHOOTING CHART
Check this list first before you call for service...
1A] Opening door unnecessarily
TEMP
1B] Thermostat set too low
NOT
1C] Cord plug pulled out from outlet
HOT
1D] Fuse blown - no power to outlet
ENOUGH
1E] Pre-Heat Cabinet
2A] Cabinet not plugged into outlet
NO HEAT
2B] Cabinet power " OFF "
2C] Fuse Blown - no power to outlet
AT ALL
2D] Heating element needs replacing
2E] Control panel needs replacing
PART NUMBER
KNB H7
HDL 12.5 AL
HDL 21.5 AL
SPCR125x.330
B1/4-20x32NZ
LTH MAG
BMPR INSERT
CRDSET10/115
CRDSET20/115
CSTR 5 R-2
CSTR 5 SB-2
SLD TS245
SLD UHS245
Consult Factory
1A] Heat escapes from cabinet when door
is opened too frequently.
1B] Set thermostat at a higher temperature.
1C] Replug cord into proper outlet.
1D] Have a qualified electrician check power
and fuse box.
1E] Assure interior of cabinet heats up,
not just cabinet air temperature.
Allow at least 30 minute pre-heat.
2A] Plug cabinet into properly grounded
electrical outlet.
2B] Press power icon on the control panel
2C] Have a qualified electrician check power
to fuse box.
2D] Heating element will either function
or not function. Consult factory.
2E] Consult factory.
8

Advertisement

loading