Exmark LAZER Z PROPANE LZS740PKC524 Operator's Manual page 54

Troubleshooting
Problem
Clutch will not engage.
Possible Cause
1. Fuse is blown.
2. Low voltage supply at the clutch.
3. Damaged coil.
4. Inadequate current supply.
5. Rotor/armature airgap is too large.
54
Corrective Action
1. Replace fuse. Check coil resistance,
battery charge, charging system, and
wiring connections and replace if
necessary.
2. Check coil resistance, battery charge,
charging system, and wiring connections
and replace if necessary.
3. Replace clutch.
4. Repair or replace clutch lead wire or
electrical system. Clean connector
contacts.
5. Remove shim or replace clutch.