Last Call Duration Display; Call Timer Display - Avaya J100 Series User Manual

4. Use the up and down cursor keys to highlight Display Mode.
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Dual Column – Each programmed button occupies one half of the screen line on which
it is displayed, either the right-hand or left-hand side. The adjacent physical button on
that side of the display is used to indicate the button's status and to control the button
feature.
• Single Column – Each programmed button feature occupies the full width of the
screen. The physical buttons on both sides of the display are used to control the button
feature. However, the button status is only shown by the left-hand button. In this mode,
appearance button labels also show a call status icon (for example: idle, alerting,
connected).
6. Press Save.
Related links
Display Controls on page 143

Last Call Duration Display

As an alternate to call timer display, you can have the phone briefly (4 seconds) display the
duration of the call after it is ended.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Show Last Call Duration.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
Display Controls on page 143

Call Timer Display

When you have calls alerting on appearance buttons, the phone can include a timer in the
appearance details shown on the display.
• The timer shows how long the call has been alerting.
April 2020
PHONE key and then press Features.
J100 Series Phone User Guide
Comments on this document? infodev@avaya.com
Last Call Duration Display
145