Introduction - Toro MM E-S Series Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Use of this product may cause exposure to
chemicals known to the State of California
to cause cancer, birth defects, or other
reproductive harm.
If you believe that your machine has a defect which could
cause a crash or could cause injury or death, you should
immediately inform the National Highway Traffic Safety
Administration (NHTSA) if you live in the United States,
or Transport Canada if you live in Canada, in addition to
notifying The Toro Company.
If NHTSA or Transport Canada receives similar complaints,
it may open an investigation, and if it finds that a safety defect
exists in a group of machines, it may order a recall and remedy
campaign. However, NHTSA or Transport Canada cannot
become involved in individual problems between you, your
dealer, or The Toro Company.
•
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236 (TTY:
1-800-424-9153); go to http://www.safercar.gov; or write
to: Administrator, NHTSA, 1200 New Jersey Avenue,
SE West Building, Washington, DC 20590. You can also
obtain other information about motor vehicle safety from
http://www.safercar.gov.
•
To contact Transport Canada, you may call
1-800-333-0510 or (819) 994-3328; go to
http://www.tc.gc.ca/roadsafety/; write to: Road
Safety and Motor Vehicle Regulation Directorate,
Transport Canada, Tower C, Place de Ville, 330
Sparks Street, Ottawa, Ontario, K1A 0N5; or email
RoadSafety@tc.gc.ca.

Introduction

This machine is designed to mix mortar, plaster, fireproofing
material, grout, and other small-grained cement products. A
vehicle equipped with an appropriate pintle hitch or ball hitch
can tow the machine..
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Write the numbers in the space provided.
1. Model and serial number
location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
2
1
2
Figure 1
2. Vehicle identification
number (VIN) location
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
G020900