Table of Contents
Advertisement
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the keypad
1. Press and hold the start/stop button (A).
A
a) The product is on when the display (B) comes
on.
b) The product is off when the display goes off.
2. If the warning indicator on the display is on or
Keypad on page 16 .
flashes, refer to
To do a check of the power trigger lockout
The power trigger lockout is designed to prevent
accidental operation. When you push the power trigger
lockout forward (1) and then press the power trigger
lockout against the handle (2), the power trigger (3) is
released. When you release the handle, the power
trigger and the power trigger lockout both move back to
their original positions. This movement is operated by
three independent springs.
8
1. Make sure that the power trigger is locked when the
power trigger lockout is in its original position.
B
2. Press the power trigger and make sure it returns to
its original position when you release it.
3. Make sure that the power trigger and the power
trigger lockout moves freely and that the return
spring operates correctly.
4. Start the product, refer to
page 13 .
5. Apply full speed.
6. Release the power trigger and make sure that the
cutting attachment stops and remains still.
To do a check of the cutting attachment guard
2
3
2
To start the product on
WARNING: Do not use a cutting attachment
without an approved and correctly attached
cutting attachment guard. Always use the
785 - 001 - 04.12.2019
1
1
Advertisement
Table of Contents
