Tools Required; Assembly Procedure - CYBEX Bravo Series Owner's Manual

Qty Part Number
4
2
2
1

Tools Required

• 9/16" Wrench
• 7/32" Allen wrench
• 3/4" Socket wrench
• Hammer
• 3/16" Pin punch
®
• Loctite #242

Assembly Procedure

Two people will be required for this procedure.
TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully.
If there is damage, see the Customer Service section of this manual for proper procedure to return, replace,
or reorder parts.
If machine CAN fit through doorway
Two people will be required for this procedure
1. Move to desired location.
2. Remove shipping cones using a 3/4" socket or wrench.
3.
Remove bolt from shipping cone with hammer. Recycle cone.
4. Attach foot pads to each foot of frame.
5. If weight stack needs to be installed, follow procedure for installing weight plates and weight plate decal.
BHSCS .375-16 × 1.00 (Included
HC700417
Locknut .375-16, Nylon (Included
HN704901
Insert, Plastic 1.00 Dia-11G
PN660200
(Included with 8810-101)
Loctite #242 (Included with
YA000201
Description
with 8810-101)
with 8810-101)
8810-101)
Page 11 of 27
Diagram