Bosch 844 Simple Instructions page 21

CC404 | Operators Guide | 23.0
Table 15: continued
Term
Silent Alarm
STAY Mode 1
STAY Mode 2
Telco Arm Sequence
Telco Disarm
Sequence
Unsealed
User Code
Zones
Bosch Security Systems | 7/05 | F01U009494B
Glossary of Terms
Description
Your installer can program zones for silent operation. When the zone programmed
for silent operation is violated during the armed period, your alarm system
communicates with the monitoring station without sounding the sirens.
The system automatically isolates zones when you arm the system in STAY Mode 1.
Only your installer can program zones to be isolated automatically in this mode.
The system automatically isolates zones when you arm the system in STAY Mode 2.
Only the Master Code holder can program zones to be isolated automatically in this
mode.
Telco arming automatically diverts your telephone number to another telephone
when the system is armed in AWAY Mode. In Australia, this feature is called "Call
Forward".
Telco disarming automatically calls the telephone exchange and does not forward
your telephone number.
Refers to zone status. A zone is unsealed when a zone is violated. The
corresponding zone indicator lights on the codepad.
The personal identification number an operator uses to arm and disarm the system.
A monitored input used to activate an alarm when violated.