Sony ICD-UX523 Operating Instructions Manual page 41

1
1
Recording Files

Connect other equipment to the IC recorder when the IC recorder is
in the stop mode.
Connect the audio output connector (stereo mini-plug) of other
equipment to the 
cable.
"Select Input" appears in the display window.
If "Select Input" is not displayed, set it in the menu (  p

Press  or  to select "Audio IN," and then press /ENTER.

Press  REC/PAUSE to start recording.
"

Start playback on the piece of equipment connected to the IC
recorder.
"
When no sound is detected for more than 2 seconds, "Dividing... " appears and
then "
The IC recorder starts recording again as a new file when sound is detected.
To record without using the synchronized recording function
Select "OFF" in step  of "To record using the synchronized recording
function" ( 
press  REC/PAUSE in step , the built-in microphones are automatically cut
off and the sound from the connected piece of equipment is recorded.
jack of the IC recorder using an audio connecting
" flashes and the IC recorder enters the recording pause mode.
" appears on the display and synchronized recording starts.
" begins to flash. The synchronized recording pauses.
, and then proceed with steps  through . When you
p. 40)
).
. 83