Sony ICD-UX523 Operating Instructions Manual page 128

1
1
Troubleshooting
FM radio (ICD-UX522F/UX523F only)
No sound comes from the speaker.
 "Audio Output" in the menu is set to "Headphones, " when you are listening to the
radio (ICD-UX522F/UX523F only).
 Set "Audio Output" to "Speaker" (  p. 77).
Sound comes from the speaker even when the headphones are plugged in.
 "Audio Output" in the menu is set to "Speaker, " when you are listening to the radio
(ICD-UX522F/UX523F only).
 Set "Audio Output" to "Headphones" (  p. 77).
The audio is weak or has poor quality when listening to the radio.
 Move the unit away from the TV.
The picture of your TV becomes unstable.
 If you are listening to an FM program near the TV with an indoor antenna, move
the IC recorder away from the TV.
You cannot receive FM radio stations, or a lot of static is heard.
 The headphones are not connected (the headphone cord is the FM antenna)
 Connect the headphones to the  (headphone) jack and extend the headphone
cord.
 "DX/LOCAL" has been set to "LOCAL. "
 Set it to "DX" (  p. 75).
You cannot preset an FM radio station.
 You have already preset 30 FM radio stations.
 Erase unwanted preset stations (  p. 74).
 "Scan Sensitivity" has been set to "Low(SCAN L). "
 Set it to "High(SCAN H)" (  p. 76).