Sony ICD-UX523 Operating Instructions Manual page 132

1
1
Troubleshooting
Message
Format Error
Process Error
Stop and Reinsert
Memory Card
Set Date&Time
No File
No Track Marks
No Memory Card
File Protected
Already Set
Past Date/Time
Unknown Data
Cause/Remedy
 The IC recorder cannot be turned on using the computer
because there is no copy of the control file required for
operation. Format the IC recorder using the formatting
function in the menu (  p. 92). Do not use your computer
to format the IC recorder.
 The IC recorder failed in memory access. Remove and then
re-insert the battery.
 Save a backup copy of your data and format the IC recorder
using the menu (  p. 92).
 A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC
recorder is in the stop mode.
 Set the clock; otherwise, you cannot set the alarm.
 The selected folder does not have any files. You cannot
move a file or set the alarm, etc., because of this.
 There are no track marks when you attempt to erase a track
mark or track marks, or divide a file at all the track mark
positions.
 There is no memory card inserted into the memory card
slot when you attempt to set the "Select Memory, " or "File
Copy" menus.
 The selected file is protected or is a "Read only" file. You
cannot erase it. Cancel the protection on the IC recorder or
cancel "Read only" on your computer to edit the file using
the IC recorder.
 You set the alarm to play back a file at a date and time
previously set on another file. Change the alarm setting.
 You set the alarm when the time has already passed. Check
it and set the appropriate date and time (  p. 54).
 This data is not in a file format that is supported by the IC
recorder. The IC recorder supports LPCM(.wav)/MP3
(.mp3)/WMA(.wma)/AAC-LC(.m4a) files. For details, see
"Design and specifications" (  p. 117).
 You cannot play back copyright protected files.
Continued 