1. Safety instructions • This device is for indoor and outdoor use. This device is for indoor and outdoor use. • All modifications to the device will void the warranty. All modifications to the device will void the warranty. • Repairs are to Repairs are to carry out by skilled personnel only.
2. Designated use This device was developed for professional use on stages, in discos, theatres etc. The device is only approved for a connection up to 230V 50/60 Hz AC voltage and for indoor and outdoor use. Regular breaks during operation increase the lifetime of your device. Avoid convulsions or any form of forceful impact during the installation or the start-up of the device.
2.1. Overhead installation Overhead installation Danger of life! Danger of life! You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and You have to observe the regulations of BGV C1 (formerly VBG 70) and EN60598-2-17 17 Installations are to carry out by skilled personnel only.
Page 6
The maximum drop exceed must not exceed 20cm. A safety rope once exposed to failing load or damaged may not be used furthermore. Adjust the desired inclination angle via the mounting bracket and tighten the screw. 6 / 20...
3. Introduction Thank you for buying the LED Street Bar MK II 16x8W RGBW 4in1 IP65. It is a powerful device. For a successful installation and operation, please read this manual carefully. 3.1. Product overview 3.2. Dimensions 7 / 20...
4. Connections 4.1. Electrical connections If you wish to change the power supply settings, see the chapter Appendix. Connect the fixture to the mains with the enclosed power cable and plug. The earth has to be connected. Cable (EU) Cable (US) International Brown Black...
5. Control Press MENU, to get to the menu. With UP/DOWN you can choose the required submenu. Confirm with ENTER. With UP/DOWN you can make the required settings. Confirm with ENTER. NOTE! Your settings are not saved until the display is extinguished. This can take up to 30s. 5.1.
6. DMX chart 6.1. DMX mode 1 (1 channel) Channel Value from Value to Function No function Color 1 Color 2 Color 3 Color 4 Color 5 Color 6 Color 7 Color 8 Color 9 Color 10 Color 11 Color 12 Color 13 Color 14 Color 15...
Color 41 Color 42 Color 43 Color 44 Color 45 Color 46 Color 47 Color 48 Color 49 Color 50 Color 51 6.2. DMX mode 2 (4 channels) Channel Value from Value to Function Dimmer red 0 – 100% Dimmer green 0 – 100% Dimmer blue 0 –...
Automatic program 24 Automatic program 25 Automatic program 26 Automatic program 27 Automatic program 28 Automatic program 29 Automatic program 30 Automatic program 31 Strobe slow – fast Dimmer 0 – 100% Dimmer red 0 – 100% Dimmer green 0 – 100% Dimmer blue 0 –...
Automatic program 27 Automatic program 28 Automatic program 29 Automatic program 30 Automatic program 31 Strobe slow – fast Dimmer 0 – 100% Dimmer red 0 – 100% LED 1 – 8 Dimmer green 0 – 100% LED 1 – 8 Dimmer blue 0 –...
Automatic program 27 Automatic program 28 Automatic program 29 Automatic program 30 Automatic program 31 Strobe slow – fast Dimmer 0 – 100% Dimmer red 0 – 100% LED 1 – 4 Dimmer green 0 – 100% LED 1 – 4 Dimmer blue 0 –...
Dimmer blue 0 – 100% LED 9 – 10 Dimmer white 0 – 100% LED 9 – 10 Dimmer red 0 – 100% LED 11 – 12 Dimmer green 0 – 100% LED 11 – 12 Dimmer blue 0 – 100% LED 11 – 12 Dimmer white 0 –...
Page 16
Automatic program 28 Automatic program 29 Automatic program 30 Automatic program 31 Strobe slow – fast Dimmer 0 – 100% Dimmer red 0 – 100% LED 1 – 2 Dimmer green 0 – 100% LED 1 – 2 Dimmer blue 0 – 100% LED 1 – 2 Dimmer white 0 –...
7. Technical data Power supply Voltage 100 – 240 V AC / 50-60 Hz Power consumption max. 128 W Light source LM type LED 4in1 Color spectrum RGBW Power 128 W Number / Power 16 x 8W Optics Beam angle 30°...