Siemens SIMATIC NET RUGGEDCOM RX1501 Installation Manual page 33

Device Management
3.3 Accessing the CompactFlash Card
2.
3.
4.
Removing the CF card
To remove the CF card from the device, do the following:
1.
24
Remove the CF card access panel.
Insert the CF card into the slot until it is fully seated.
1
2
CompactFlash Card
1
Access Panel
2
Figure 3.3 Inserting the CF Card
Secure the CF card access panel to the chassis.
Make sure the device is powered down.
RUGGEDCOM RX1501
Installation Manual, 10/2021, C79000-G8976-1054-21