ScanSoft ICD-BP150VTP Dragon Naturally Speaking 7 User Manual page 183

A P P E N D I X Commands List
Selecting text
Selecting specific words
For more information about these commands, see "Selecting text by voice" on page
45.
Selecting an entire line or paragraph
For more information about these commands, see "Selecting an entire paragraph or
line" on page 47.
Selecting a word or character
TIP
Dragon NaturallySpeaking User's Guide
S A Y
Select glass
Select Again
US/Canada: Select It was
Through night
Other Dialects: Select It
was To night
Unselect That
SA Y T H E N
Select Next
Previous
Forward
Back
Last
SA Y T H E N
Select Next
Previous
Forward
Back
Last
You can also say "Select Word," "Select Line," "Select Paragraph," or "Select Character."
TO
Select a specific word or words that are
visible on screen, in this example, the word
glass.
Select the same text again but in a different
place that is also visible on screen.
Select a range of words visible on screen. In
this example, It was a dark and stormy night
is the selected text.
Unselect (clear) selected text.
T H E N
Line
Paragraph
2...20 Lines
2...20 Paragraphs
T H E N
Word
Character
2...20 Words
2...20 Characters
177