Getchannellist; Settagid - Siemens SIMATIC RF310M Function Manual

Note
ETSI channels are only relevant for reader with ETSI profile.
While the RF680M supports no frequency hopping only one channel must be defined.
Otherwise the function will rise a RfReaderApiException.
Version information
Supported in RFID Reader Interface since V1.3
3.4.12

GetChannelList

GetChannelList ( ) : string
Parameters
None
Return value(s)
This function returns the used ETSI channels as a coma separated list. Valid channels are
103,106,109,112.
Exceptions
RfReaderApiException
Note
ETSI channels are only relevant for reader with ETSI profile.
Version information
Supported in RFID Reader Interface since V1.3
3.4.13

SetTagID

SetTagID(currentTagID : string, newTagID : string,
:string) : void
Mobile Readers
Function Manual, 12/2010, J31069-D0198-U001-A2-7618
Error while starting the communication with the reader. Check
the Error member for more information.
RFID Reader Interface Reference
3.4 IRfReaderApi
password
51