Disc; Playing A Disc; Dvd/Vcd Basic Operation - Kenwood DDX919WS Instruction Manual

Disc

Disc
([

Playing a disc

Ñ
Insert a disc
1
Press the [G] button.
[ ]
[ ]
2
Touch [DISC EJECT].
h The panel opens. h
3
Insert the disc into the slot.
[ ]
[ ]
h The panel closes automatically.
h
The unit loads the disc and playback starts.
22
/
] [ ])
Ñ
Eject a disc
1
Press the [G] button.
2
Touch [DISC EJECT].
When removing a disc, pull it horizontally.
3
Press the [G] button.
h The panel closes.
h
NOTE
• To forcibly eject the disc, press and hold the
[G] button for 2 seconds and then touch [DISC
EJECT] after the message is displayed.

DVD/VCD Basic Operation

Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD
mode before starting operation for DVD and VCD,
see Switch the operation mode (P.82).
• The screen shot below is for DVD. It may be
different from the one for VCD.
1
When the operation buttons are not
displayed on the screen, touch
Control screen
1
2
3
DVD
2
7 area.
4
5
VCD