Dimension One Spas @HOME Series Owner's Manual page 27

Turn on the Bluetooth functionality on your personal device. Once it
searches for nearby connections, select the "Gecko in.stream" option. If
prompted, enter 5555 as the password to pair your device. The Gecko
in.stream can pair up to 8 devices but it will connect to first connected
device in range of the hot tub. After you have paired your device, you
may connect and disconnect from the in.stream Audio System at any
time using your device.
WARNING:
ISTS AND EQUIPMENT DAMAGE! Never install or remove
electrical devices while hands are wet or while sitting partially
immersed or fully immersed in hot tub!
C. Options Menu
To open the options menu, hold the Mode button for three seconds.
Once in the menu, use the Up and Down buttons to adjust each option.
Push the Mode button to move to the next option. If you don't push
anything for ten seconds, the menu will quit and save your changes
automatically.
• Filter Cycle Length: Choose from 60, 90, 120, 150 or 180 minutes.
• Filter Cycles Per Day: Choose from one, two, three or four cycles.
• Temperature Units: Choose from Fahrenheit (°F) or Celsius (°C).
Note: A built-in timer will automatically shut the pump off after 30 minutes
(60 minutes on some models), unless it is turned off manually. A new
30-minute cycle begins for each pump when its JETS button is pushed.
Use this function to cause the spa to filter immediately after use— just
push the Jets button once when you get out.
RISK OF ELECTRICAL SHOCK HAZARD EX-
@Home Collection
Page 23