10.0 Control Panel; Mode Button - Dimension One Spas @HOME Series Owner's Manual

@Home Collection

10.0 Control Panel

Press any button to activate the keypad. After 2 minutes without activity,
the keypad will go dark.
The pictured control is the two-pump version, models that have one
pump will only have one "Jets" button.
1. Display Window: Shows the current status of the hot tub.
2. Filter Indicator Light: Glows when a filter cycle is in progress.
3. Set Indicator Light: Glows when the temperature displayed is the
desired temperature, not the actual water temperature.
4. Heat Indicator Light: Glows when the heater is on.
5. Jets Button 1: Push once for low speed, twice for high speed. Push a
third time to turn off.
6. Jets Button 2: Push once to turn on, twice to turn off.
7. Light Button: Turns light on and off. To lock or unlock a color, turn
light off for three seconds, then on again.
8. Up and Down Buttons : Change desired water temperature.
9. Mode Button : Opens the audio and/or options menus.
10.1

Mode button

A. Audio Menu
If your spa is equipped with a stereo option, press once to enter Auxiliary
audio mode indicated by an AUX in the display window.
Use the buttons marked
device is connected to the Bluetooth® stereo.
B. Bluetooth® stereo
The optional stereo system operates using Bluetooth technology and
features an amplifier, subwoofer and two speakers.
Page 22
2 3 4
5
1
7
6
to play, pause, or skip tracks when a
9
8