12
en | Introduction
3 =
4 =
5 =
System configurations for Access Control applications.
–
–
–
Using Wiegand reader interfaces, up to four peripheral devices can be connected to each
AMC2-4R4. The interfaces are point-to-point connections, meaning that only one reader can be
connected to one interface.
The extension interface supports up to three additional I/O boards (AMC2-8IOE, AMC2-16IE,
or AMC2-16IOE). All extension boards are controlled by the AMC2 and are freely combinable.
2020-01 | V02 |
Wiegand reader (1 - 4)
Communication and power supply
Ethernet
The minimum configuration consists of:
–
one PC with system software,
–
one AMC2 controller,
–
one AMC power supply,
–
one AMC enclosure.
The maximum configuration depends on the system software,
Each AMC2-4W controller can be extended with an AMC2-4WE extension module.
Installation manual
Access Modular Controller 2
Bosch Security Systems B.V.