Fortinet FortiGate FortiGate-5001FA2 Installation Manual page 36

High availability installation
12
13
36
Select Apply.
The FortiGate-5000 modules negotiate to establish an HA cluster. When you select
apply you may temporarily lose connectivity with the FortiGate module as the
negotiation takes place.
Repeat this procedure for all the FortiGate-5000 modules in the cluster. Once all of
the modules are configured, continue with
on page 37.
Configuring FortiGate-5000 modules for HA using the CLI
Use the following procedure to configure each FortiGate-5000 modules for HA
operation.
To change the FortiGate-5000 module host name
1 Connect to the CLI.
See "Connecting to the command line interface (CLI)" on page
2 Change the host name.
config system global
set hostname <name_str>
end
To configure the FortiGate-5000 module for HA operation
1 Configure HA settings.
Use the following command to:
• Set the HA mode
• Set the Group ID
• Change the unit priority
• Enable override master
• Enter an HA password
• Select an active-active HA schedule
config system ha
set mode {a-a | a-p | standalone}
set groupid <id_integer>
set priority <priority_integer>
set override {disable | enable}
set password <password_str>
set schedule {hub | ip | ipport | leastconnection | none
| random | round-robin | weight-round-robin}
end
The FortiGate-5000 module negotiates to establish an HA cluster.
2 Repeat this procedure for all the FortiGate-5000 modules in the cluster. Once all of
the modules are configured, continue with
on page 37.
3 If you are configuring a Transparent mode cluster, switch the FortiGate-5000 modules
to Transparent mode.
01-28011-0259-20060210
Configuring the FortiGate for the Network
"Connecting the cluster to your networks"
16.
"Connecting the cluster to your networks"
Fortinet Inc.