Installing A Backup Firmware Image - Fortinet FortiGate FortiGate-500 Administration Manual

Fortinet fortigate fortigate-500: user guide
Hide thumbs Also See for FortiGate FortiGate-500:
Table of Contents

Advertisement

System status
FortiGate-500 Administration Guide

Installing a backup firmware image

To run this procedure you:
access the CLI by connecting to the FortiGate console port using a null-modem
cable,
install a TFTP server that you can connect to from the FortiGate as described in
the procedure
page
37.
To install a backup firmware image
1
Connect to the CLI using the null-modem cable and FortiGate console port.
2
Make sure that the TFTP server is running.
3
Copy the new firmware image file to the root directory of your TFTP server.
4
To confirm that the FortiGate unit can connect to the TFTP server, use the following
command to ping the computer running the TFTP server. For example, if the IP
address of the TFTP server is 192.168.1.168:
execute ping 192.168.1.168
5
Enter the following command to restart the FortiGate unit:
execute reboot
As the FortiGate unit starts, a series of system startup messages are displayed.
When of the following message appears:
Press any key to enter configuration menu.....
......
6
Immediately press any key to interrupt the system startup.
Note: You have only 3 seconds to press any key. If you do not press a key soon enough, the
FortiGate unit reboots and you must log in and repeat the
If you successfully interrupt the startup process, the following message appears:
[G]:
Get firmware image from TFTP server.
[F]:
Format boot device.
[B]:
Boot with backup firmware and set as default.
[Q]:
Quit menu and continue to boot with default firmware.
[H]:
Display this list of options.
Enter G,F,B,Q,or H:
7
Type G to get the new firmware image from the TFTP server.
The following message appears:
Enter TFTP server address [192.168.1.168]:
8
Type the address of the TFTP server and press Enter.
The following message appears:
Enter Local Address [192.168.1.188]:
"Installing firmware images from a system reboot using the CLI" on
01-28006-0007-20041105
Changing the FortiGate firmware
command.
execute reboot
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents