Service Pop3 - Fortinet FortiGate FortiGate-500 Administration Manual

CLI configuration

service pop3

320
Example
This example shows how to add antivirus scanning for FTP traffic on ports 22 and 23.
Adding more ports for scanning does not erase the default, port 21. Use the unset
command to remove all ports from the list.
config antivirus service ftp
set port 22
set port 23
end
This example shows how to display the antivirus FTP traffic settings.
get antivirus service ftp
This example shows how to display the configuration for antivirus FTP traffic.
show antivirus service ftp
Use this command to configure how the FortiGate unit handles antivirus scanning of
large files and what ports the FortiGate unit virus scans for POP3 traffic.
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Command syntax pattern
config antivirus service pop3
set <keyword> <variable>
end
config antivirus service pop3
unset <keyword>
end
get antivirus service [pop3]
show antivirus service [pop3]
Table 29: antivirus service pop3 command keywords and variables
Keywords and variables
port <port_integer>
01-28006-0007-20041105
Description
Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for POP3.
You can use ports from the range
1-65535. You can add up to 20
ports.
Antivirus
Default Availability
110 All models.
Fortinet Inc.