Audi RS 3 LMS DSG User Manual page 49

Secondly, Audi Sport has developed a new electronic tool to activate the fuel tank pump both manually or
with an automatic function.
Fuel draining process:
1. Connect the electronic tool on the fuel pump connector (#2 on the picture above), placed on the
fuel tank, and the power supply on the auxiliary battery connector (#3).
2. Connect the fuel socked connector on the engine bay.
3. Switch on the electric tool in automatic or manual mode. If the automatic mode is selected the tool
will stop the draining process when there is no more fuel inside the tank.
Flow fuel pump filter cleaning process:
1. Drain out the fuel tank completely.
2. Open the fuel tank right side cover (picture 1).
3. Raise a little bit the plate and disconnect the pipes and wirings.
4. Turn the fastening elements and pull up the pump from the reservoir (picture 2). Pull hard to
disconnect the black hoses from the main pump. Remember to clip them hard again when
mounting.
5. Remove the green mesh filter and clean it (picture 3).
In case you need to take out the reservoir, unclip the three green plastic brackets and pull-up the reservoir
(picture 4).
Picture 1
Picture 3
Picture 2
Picture 4
49