Audi RS 3 LMS DSG User Manual page 27

#7: Transponder
This auxiliary connector is placed behind the right front headlight. All Audi RS 3 LMS cars are provided
without transponder.
Transponder
Matching connector
Pin-out
1 12v
2 GND
#8: Additional headlights
This auxiliary connector is placed behind the left front headlight, under the engine ECU. All Audi RS 3 LMS
cars are provided without additional headlights but this connector is ready for a plug and play solution that
allows the driver to turn additional headlights from the steering wheel.
Additional headlights
Matching connector
Pin-out
1 12v
2 GND
3 signal
Following two recommended solutions to install the headlights electrically:
Option 1:
Notes:

Total maximum current 7 A.

Mandatory to install a maximum 100 mA coil current relay. TE 3-1414773-5 recommended.
 Mandatory to install a freewheel diode on relay's coil.

When using the DRV signal pin, the headlights will switch on together with the standard high beam
when pushing the steering wheel dedicated button.
Option 2:
Notes:

Total maximum current 7 A.
357 972 762
Terminal
FS 2,8 x 0,8
FS 2,8 x 0,8
AMP Super-seal 3-
way 282105-1
Terminal
AMP 183024-1
AMP 183024-1
AMP 183024-1
7
8
27