Fortinet FortiGate FortiGate-3600 Installation Manual page 30

Using the command line interface
30
To configure interfaces
1 Log in to the CLI.
2 Set the IP address and netmask of the internal interface to the internal IP address and
netmask that you recorded in
config system interface
edit internal
set mode static
set ip <address_ip> <netmask>
end
Example
config system interface
edit internal
set mode static
set ip <192.168.120.99> <255.255.255.0>
end
3 Set the IP address and netmask of the external interface to the external IP address
and netmask that you recorded in
config system external
edit external
set mode static
set ip <address_ip> <netmask>
end
Example
config system external
edit external
set mode static
set ip <204.23.1.5> <255.255.255.0>
end
To set the external interface to use DHCP, enter:
config system interface
edit external
set mode dhcp
end
To set the external interface to use PPPoE, enter:
config system interface
edit external
set mode pppoe
set connection enable
set username <name_str>
set password <psswrd>
end
Table 5 on page
Table 5 on page
01-28005-0027-20041101
NAT/Route mode installation
26. Enter:
26.
Fortinet Inc.