Fortinet FortiGate FortiGate-3000 Install Manual page 52

Next steps
52
If the FDN setting changes to available, the FortiGate unit has successfully
connected to the override server.
If the FDN stays set to not available, the FortiGate unit cannot connect to the
override server. Check the FortiGate configuration and network configuration for
settings that would prevent the FortiGate unit from connecting to the override
FortiGuard server.
To add an override server using the CLI
1 Log into the CLI.
2 Enter the following command:
config system autoupdate override
set address
set status
end
FortiGate-3000 and FortiGate-3600 FortiOS 3.0MR4 Install Guide
Configuring the FortiGate unit
01-30004-0270-20070215