Equipment - Echo SRM-3020U Operator's Manual

SAFETY

Equipment

Use only approved attachments. Serious injury may result from
the use of a non-approved attachment combination. ECHO INC.
will not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and
approved by ECHO INC. Read and comply with all safety
instructions.
Do not attempt to modify this product. Serious injury can
◆
result from the use of any modified product.
Check unit for loose or missing nuts, bolts, and screws.
◆
Tighten or replace as needed.
Inspect shield for damage and ensure that shield is
◆
properly installed, and that the cut-off knife is securely in
place. Replace if either is damaged or missing.
Check that the cutting attachment is firmly attached and in
◆
safe operating condition.
Manufacturer recommended flexible non-metallic line is
◆
installed in the trimmer head.
Assure that throttle trigger, throttle trigger lockout, and
◆
stop switch all work properly.
Check that handle and harness (if included) are installed
◆
and adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
ALWAYS stop engine, disconnect spark plug, and make
◆
sure all moving parts have come to a complete stop before
assembling unit, removing obstructions, clearing debris, or
servicing unit.
Do not connect spark plug lead to spark plug unitl unit is
◆
ready for use.
DO NOT start or operate unit unless all guards and
◆
protective covers are properly assembled to unit.
NEVER reach into any opening while the engine is running.
◆
Moving parts may not be visible through openings.
12
SRM-3020U
X7502350202
© 12/2019 ECHO Inc.