2. Install the:
a.
palmrest
b.
hard drive
c.
keyboard
d.
battery
e.
base cover
f.
SD card
3. Follow the procedure in
Heat sink
Removing the heat sink assembly
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
keyboard
e.
hard drive
f.
palmrest
3. To remove heat sink:
a. Remove the 2 (M2.0x3.0) screw that secures the eDP cable bracket to the system board [1].
b. Remove the eDP cable bracket from the system [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
63