Power Connector Port; Removing The Power Connector Port - Dell Precision 7540 Service Manual

2. Install the:
a. palmrest
b. battery
c. base cover
d. SD card
3. Follow the procedure in

Power connector port

Removing the power connector port

1. Follow the procedure in
2. Remove the:
a. SD card
b. base cover
c. battery
3. To remove power connector port:
a. Disconnect the power connector cable from the connector on the system board [1].
b. Peel the adhesive tape that secures the power connector cable to the system and unroute the cable [2, 3].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components 47