2. Install the:
a.
palmrest
b.
hard drive
c.
keyboard
d.
battery
e.
base cover
f.
SD card
3. Follow the procedure in
LED board
Removing the LED board
1. Follow the procedures in
2. Remove the:
a.
SD card
b.
base cover
c.
battery
d.
keyboard
e.
hard drive
f.
palmrest
3. To remove LED board:
a. Lift the tab and disconnect the LED-board cable from the system board [1].
b. Peel the LED-board cable from the system.
c. Remove the single (M2.0x5.0) screw that secures the LED board to the system [2].
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
61